cheie e39 facelift

[///MPower_5er]

salut,

am si eu o problema si sper sa ma ajute cineva..

am pus masina la service pentru ca sa schimb supensiile, si a ramas masina la ei 6 zile :) , si dupa aceea am vrut sa iau masina de acolo dar a murit bateria, si cheia era in contact tot timpul.. si acuma nu mai merge telecomanda de la cheie !!!! stie cineva care e problema sau o solutie..

multumesc anticipat

[Calin]

cauta ca era pe undeva un topic despre reinitializare cheie, nu mai stiu unde

[///MPower_5er]

cauta ca era pe undeva un topic despre reinitializare cheie, nu mai stiu unde

merci man, am resolvato,dar nu merge decat pentru o cheie

 

Remote Key Re-Initialise - If a key fails to operate remotely, it will have to be re-initialised (all keys in sequence at the same time)

 

- Get in and “close all doors”

 

- Turn ignition on & off quickly (no more than 5 seconds) to start the process. Next action must take place within 30 seconds

 

- First key - hold down button #2 (unlock) while striking button #1 (lock) three times. Release button #2. Confirmed by door lock operation.

 

- Repeat for second key within 30 seconds of first.

 

- After last key then cycle the ignition on/off to finalise the process (not necessary to start the engine.

 

 

Both keys should now have new "randomly selected" security "code words" - asigned by the car's system.

Those codes will be continuously incremented within the new sequence each time you hit a button. It is when they get out of sequence with the car that they loose the capability to be recognised and you then have to do this again.

 

That occurs when you take longer than 1 minute changing the battery, or if you hit buttons more often the 1000 times when it is out of range of the car.

 

__________________

[///MPower_5er]

UPDATE:

If you place a new transmitter into service

(either a replacement or an additional

transmitter), it must be initialized:

1 Enter the vehicle and close the doors.

2 Turn the ignition key briefly (max.

5 seconds) to position 1 in the steering

lock and then turn it back to position

0. Remove the key.

3 Press button 1 (refer to the illustration)

and hold it. Maintain pressure on

button 1 while rapidly pressing button

2 three times in succession within a

period of 10 seconds.

463de028

4 Release button 1.

5 The central locking system activates

and releases all lock mechanisms in

rapid succession to indicate that the

initialization procedure has been successfully

completed.

If the central locking system does not

react, you must repeat the initialization

procedure.

If you possess additional transmitters

for your vehicle (up to a maximum of

four units), you must now initialize these

as well. Be sure that no more than

30 seconds is allowed to elapse between

the individual initialization procedures.

Repeat steps 3 and 4 for each of

the transmitters when doing this. The

central locking system will confirm every

initialization procedure as described in

step 5.

In the event of a system malfunction,

please contact your BMW center. You

can also obtain replacement transmitters

here