monitor settings e39

[deadmanwalkn]

sal

 

am avut inainte toate canalel de radio in numele si oriunde maduc apare singur stations care este acolo...

fetita mea sa jucat cu radioul si acuma pare dacat 6 programe de radio program 1 - 6

cum le pot pune inapoi?

nu vreau programu vreau dacat numele posturile de radio

ms mult

[X X L]

la cum ai scris, e greu de inteles ce vrei... <_>

 

in fine, cred ca trebuie sa cauti butonul "RDS" care iti permite afisarea numelui programului, nu doar a frecventei...

[deadmanwalkn]

la cum ai scris, e greu de inteles ce vrei... <_<

 

in fine, cred ca trebuie sa cauti butonul "RDS" care iti permite afisarea numelui programului, nu doar a frecventei...

 

fata mea a umblat la radio din masina si nu-mi apar posturile imi apare numai program 1 pana 6 inainte imi areta ce post este in localitate unde eram

ex: radio zu

pro fm

oldies

etc

vreau sa pun posturile asa

ms mult

scuze dar nu stiu prea bine romaneste

[X X L]

atunci eu imi cer scuze...

 

trebuie sa cauti frecventa postului dorit, apoi o memorezi tinand apasata tasta 1, 2 - 6 (pe care o vrei tu) timp de 3 secunde...

 

postul respectiv de radio ramane memorat pe butonul 1, 2 - 6 pe care l-ai ales...

 

cred ca fetita ta a schimbat din butonul FM, benzile de receptie radio (FM1, FM2, FM3, FMA)...

 

succes !

[deadmanwalkn]

atunci eu imi cer scuze...

 

trebuie sa cauti frecventa postului dorit, apoi o memorezi tinand apasata tasta 1, 2 - 6 (pe care o vrei tu) timp de 3 secunde...

 

postul respectiv de radio ramane memorat pe butonul 1, 2 - 6 pe care l-ai ales...

 

cred ca fetita ta a schimbat din butonul FM, benzile de receptie radio (FM1, FM2, FM3, FMA)...

 

succes !

stiu sa memorez...eu vreau sa sterg programul sa imi apara posturile de radio ca inainte ex: daca maduc in ungaria imi apare automat postul de radio din ungaria unu dupa altu asa a fost inainte

[Myx]

stiu sa memorez...eu vreau sa sterg programul sa imi apara posturile de radio ca inainte ex: daca maduc in ungaria imi apare automat postul de radio din ungaria unu dupa altu asa a fost inainte

 

 

Cred ca te referi la PTY sau poate chiar AF o functie pt care cred ca ai buton separat !

 

Studiaza putin asta si vezi exact unde te incadrezi apoi activeaza functia din RDS

 

Eu suspectez AF ..care schimba automat posturile functie de puterea semnalului FM

 

 

 

AF

Alternative Frequencies This allows a receiver to re-tune to a different frequency providing the same station when the first signal becomes too weak (e.g. when moving out of range). This is often utilised in car stereo systems.

CT

Clock Time Can synchronize a clock in the receiver or the main clock in a car. Due to transmission varies, CT can only be accurate to within 100 ms of UTC.

EON

Enhanced Other Networks Allows the receiver to monitor other networks or stations for traffic programmes, and automatically temporarily tune into that station.

PI

Programme Identification This is the unique code that identifies the station. Every station receives a specific code with a country prefix. In the US, PI is determined by applying a formula to the station's call sign.

PS

Programme Service This is simply an eight-character static display that represents the call letters or station identity name. Most RDS capable receivers display this information and, if the station is stored in the receiver's presets, will cache this information with the frequency and other details associated with that preset.

PTY

Programme Type This coding of up to 31 pre-defined programme types – e.g. (in Europe): PTY1 News, PTY6 Drama, PTY11 Rock music, – allows users to find similar programming by genre. PTY31 seems to be reserved for emergency announcements in the event of natural disasters or other major calamities.

REG

Regional This is mainly used in countries where national broadcasters run "region-specific" programming such as regional opt-outs on some of their transmitters. This functionality allows the user to "lock-down" the set to their current region or let the radio tune into other region-specific programming as they move into the other region.

RT

Radio Text This function allows a radio station to transmit a 64-character free-form textual information that can be either static e.g. station slogans or in sync with the programming such as the title and artist of the currently-playing song.

TA, TP

Traffic Announcement, Traffic Programme The receiver can often be set to pay special attention to this flag and e.g. stop the tape/pause the CD or retune to receive a Traffic bulletin. The TP flag is used to allow the user to find only those stations that regularly broadcast traffic bulletins whereas the TA flag is used to stop the tape or raise the volume during a traffic bulletin.

TMC

Traffic Message Channel Digitally encoded traffic information. Not all RDS equipments supports this. Often available for Automotive navigation systems. In many countries only encrypted data is broadcast, and so a subscription and appropriate decoder is required to use.

Edited May 2, 2009 by myxage

[deadmanwalkn]

stiu sa memorez...eu vreau sa sterg programul sa imi apara posturile de radio ca inainte ex: daca maduc in ungaria imi apare automat postul de radio din ungaria unu dupa altu asa a fost inainte

 

 

Cred ca te referi la PTY sau poate chiar AF o functie pt care cred ca ai buton separat !

 

Studiaza putin asta si vezi exact unde te incadrezi apoi activeaza functia din RDS

 

Eu suspectez AF ..care schimba automat posturile functie de puterea semnalului FM

 

 

 

AF

Alternative Frequencies This allows a receiver to re-tune to a different frequency providing the same station when the first signal becomes too weak (e.g. when moving out of range). This is often utilised in car stereo systems.

CT

Clock Time Can synchronize a clock in the receiver or the main clock in a car. Due to transmission varies, CT can only be accurate to within 100 ms of UTC.

EON

Enhanced Other Networks Allows the receiver to monitor other networks or stations for traffic programmes, and automatically temporarily tune into that station.

PI

Programme Identification This is the unique code that identifies the station. Every station receives a specific code with a country prefix. In the US, PI is determined by applying a formula to the station's call sign.

PS

Programme Service This is simply an eight-character static display that represents the call letters or station identity name. Most RDS capable receivers display this information and, if the station is stored in the receiver's presets, will cache this information with the frequency and other details associated with that preset.

PTY

Programme Type This coding of up to 31 pre-defined programme types – e.g. (in Europe): PTY1 News, PTY6 Drama, PTY11 Rock music, – allows users to find similar programming by genre. PTY31 seems to be reserved for emergency announcements in the event of natural disasters or other major calamities.

REG

Regional This is mainly used in countries where national broadcasters run "region-specific" programming such as regional opt-outs on some of their transmitters. This functionality allows the user to "lock-down" the set to their current region or let the radio tune into other region-specific programming as they move into the other region.

RT

Radio Text This function allows a radio station to transmit a 64-character free-form textual information that can be either static e.g. station slogans or in sync with the programming such as the title and artist of the currently-playing song.

TA, TP

Traffic Announcement, Traffic Programme The receiver can often be set to pay special attention to this flag and e.g. stop the tape/pause the CD or retune to receive a Traffic bulletin. The TP flag is used to allow the user to find only those stations that regularly broadcast traffic bulletins whereas the TA flag is used to stop the tape or raise the volume during a traffic bulletin.

TMC

Traffic Message Channel Digitally encoded traffic information. Not all RDS equipments supports this. Often available for Automotive navigation systems. In many countries only encrypted data is broadcast, and so a subscription and appropriate decoder is required to use.

 

 

nu stiu daca aia e dar o sa incerc miine

ms mult